Under Sink Water Filter
Have you ever wondered why more and more people are turning to under sink water filters to purify their water? The fact that there are more than 2100 toxic chemicals in it could be one of the reasons!
Recent studies have shown us just how bad the quality of our water has become, with chlorine, lead, prescription drugs and who knows what else in it. Our municipal treatment plants can't cope and just add to the problem by adding lots of chlorine, a toxic substance itself.
An undersink water filter is a great solution, saving you space on the worktop and removing much of the noise that can be emitted from some makes. However it is vital to ensure you select the right system or you may not be protecting yourself at all.
The now fast fading reverse osmosis systems are best avoided as they remove vital minerals that we need to remain healthy, like calcium and magnesium, and are expensive to purchase and maintain. Crucially they are not effective at removing the very dangerous synthetic drugs and chemicals.
The best under sink water filters employ a multi-stage process using an activated carbon filter. An ion exchange is also vital to maintain the correct ph balance. This process will ensure a 99% contaminant removal success rate, whilst leaving in those essential minerals.
Be sure to check the manufacturers performance data sheet to identify exactly what it removes, as they are required to show these to you. Don't settle for anything less than a 99% removal rate.
Also look for one that gives you a flow rate of between 25-30 gallons an hour so you're not standing around all day pouring water!
And lastly, the most expensive ones aren't always the best option. I have seen some RO systems go for over $300, while a high quality multi-stage one as I have outlined can be had for around $175.
I hope you can now see how important it is to select the right undersink water filter in order to get the maximum health benefits and great tasting water, thereby safeguarding your health for the present and the future.
If you would like to learn more about the types of under sink water filters that I personally recommend and use, visit my website today.
About the Author:
Ray Hamilton is a dedicated advocate and researcher of the incredible benefits of under sink water filters. Take a moment to visit his site now at http://www.healthy-filtered-water.com and discover which products Ray recommends after extensive research.
Article Source: ArticlesBase.com - Under Sink Water Filters—Essential Factors To Look Out For
How to drill hole through pipe for saddle valve?
I'm installing an under-sink water filter. For the saddle valve, how do I drill the 1/8" hole through the iron pipe? What is the easy way to do this? Seems like I will be slipping around a bit. Any tips on this step?
1) most saddle valves are installed using a turn screw piercer that comes with the valve for copper and are not designed for steel. steel is not soft enough to form a good seal to the saddle valve.
2) saddle valves are much more prone to leakage than other joints, so please consider adding a T connection in to the pipe in between the supply pipe and the faucet with the bottom of the T capable of connecting to the filter tubing with a compression fitting.
3) if you still feel you need to drill the hole, you could make a jig from 2 pieces of wood, both wider than the pipe, one piece with a 1/8 inch hole pointed right at where you want the hole, the other would be screwed to the first piece of wood on the other side of the pipe to hold the first in place. A "V" shaped cut in both pieces would steady the wood around the pipe. The v cuts should not be so large that the cuts allow play in the wood around the pipe.