Well Water Filter

A lot of people are getting more and more concerned about the quality of their drinking water. And according to published reports they have very good reason to be concerned. It has been estimated that almost 7 million Americans get sick each year from drinking contaminated tap water. And on top of that, many studies that have been done recently indicate that most bottled water is no better for you than what you may get from your home tap. What that essentially means is that you are paying much more for the same quality of water then.

So water filtration systems have become very popular with many homeowners as a means of improving their home. There are several kinds of filtration systems in use today, and we will try to help you get familiar with the most important ones.

1. The cheapest to purchase, easiest to use, and most portable are water pitchers designed specifically for the purpose of filtering water. The advantage of these water pitchers is their simplicity itself. All you have to do is fill the picture up with tap water and then let it filter out the impurities. The biggest disadvantage to using water pitcher filters is the time that it takes for the water to be filtered. Very often they take 15 minutes or more just to filter a half-gallon of water. So obviously, if you often need water right away this may not be your best solution.

2. The next step up in the water filter chain are faucet mounted water filters. These are often seen advertised on television and in magazines. As the name indicates, they connect to the end of your water faucet, and have a lever so that you can either choose straight tap water, or to send the tap water through your filter instead. These are also very inexpensive types of filters, and very easy to install. They filter water much more quickly than water pitcher filters, but the filter cartridges have to be changed on a regular basis, perhaps every month or so.

3. Undersink water filters have the advantage of providing some of the best overall water filtration possible, and also are stored out of sight. They also work much faster then either water pitcher filters or faucet mounted filters. However, the biggest drawback to them is that in many cases professional installation is a good idea. Some homeowners that are very handy may attempt to tackle the installation of an undersink water filter, but for the average person it may be too much of a job. Cartridges are also used as the filter material for these units, but they only have to be replaced about every six months or so.

4. Whole house water filters are able to provide filtered water to every faucet in your home easily and quickly, which many see as a clear advantage. However, they can be even more involved to install than undersink units, and so most often you will need the services of a plumber to get it set up. The filters in these units also last about six months or so.

5. Reverse osmosis water filters were very popular in the past, but are not nearly as popular today due to the increasing effectiveness of some of the less expensive and easier to install water filtration systems. Perhaps the biggest drawback about reverse osmosis filters is that they waste almost 5 gal. of water for every gallon that they purify. On the plus side though, they are one of the best water filtration systems available, capable of filtering out even some of the smallest and most obscure pollutants.

As you can see, there are several choices to be made when you're considering home water filter systems, and hopefully the information provided above will help you make a more informed choice of the water filtration system that will work best for you.

About the Author:

You can find
home water filter systems
and
water filter reviews
by visiting our Home Improvement website.

Article Source: ArticlesBase.com - Your Guide To The Best Home Water Filter Systems

Cold weather limits work on Marysville waste water treatment plant
Cold weather and the holidays have slowed down work slightly at the Marysville waste water treatment plant, but crews are back to it this week. City Engineer Jason Hami said the $20-million overhaul of the plant is on schedule and within budget.

Water Purifier Filter

Let's face it. The quality of water being supplied to our homes is deteriorating day by day. With all kinds of new chemicals being produced in the industries, sooner or later they make their way into the water supply and pose a risk to our health. You need to ask yourself then - can your water purifier filter handle all these chemicals and other contaminants present in the water?

The three main categories of contaminants a good water purifier filter should be able to filter out are:

1) Dust and Organic matter

Dust particles, bacteria, leaves, decayed organic matter – these all fall into this category. They are also the simplest of all to filter out from the water due to their large size, and almost any purifier is capable of handling them. So be it a Distiller, a simple Carbon filter or even a Reverse Osmosis filter, all of them can remove these impurities from the water.

2) Heavy Metals

Traces of heavy metals like Lead and Asbestos can frequently be found in our water. These metals are mostly added into the water due to the industrial wastes being dumped into our water sources like rivers and lakes. The metals from pipes in the water distribution network also add to it. These metals are especially harmful for children and can hamper their physical and mental growth. The good news is – most purifiers can handle these dangerous contaminants too without any problem.

3) Dangerous Chemicals

This is the category of contaminants that separates the boys from the men – so to speak. With the number of chemicals in our water increasing at a rapid rate – the old technologies have not been able to keep pace with them. So the pesticides and fertilizer traces, pharmaceutical drugs, hormones, soaps and shampoos – they all pose a serious health risk that the older Distillers and Reverse Osmosis filters cannot handle. Only a good multi stage water purifier filter can handle these chemicals and produce 99% pure water.

Apart from the purification, another factor to be considered is the mineral content of the water. Water in nature contains many minerals inside like Calcium, Sodium and Magnesium – which are needed by our body to keep running smoothly. Purifiers like Distillers and RO filters remove these minerals from the water. Drinking the resultant de-mineralized water can cause mineral deficiencies in the body and lead to health problems down the line.

Multi stage purifiers score over the other purifiers here also as they do not remove the essential minerals from the water.

Now that you have this information, you can make an intelligent choice as to the right water purifier filter for your home. To know about a high quality line of filters that can do all this and more – visit my website now.

About the Author:

Daniel Woods is a dedicated advocate and researcher of the benefits of safe, clean, healthy filtered water. He shares his research on his website - Water Purifier Home. If you want to know how to choose a water purifier, visit - http://www.waterpurifierhome.com and learn about the products our editors personally use and recommend.

Article Source: ArticlesBase.com - Three Types Of Contaminants Your Water Purifier Filter Needs To Remove

want to add water purifier to kitchen faucet that has extension line. ?

is there a way to add a water faucet filter to purify water if i have the kitchen faucet that i can pull out?

Yes. Culligan and Pentek both make great undersink water filters that are easy to install. They are relatively inexpensive. They are also easy to maintain.

Water Faucet

Kitchen Faucet Buying tips

A durable and stylish kitchen faucet or bath faucet blends together function and aesthetics. The well made faucet makes life a lot easier. Excellent valve mechanism and more durable finishes boost longevity and looks.

Here are six steps in choosing the right faucet for you:

1. Two-handle designs, generally goes for as low as $50, allows you to regulate the temperature more accurately. Having independent control for the hot and cold water makes adjusting the temperature easier.

The single handle faucets also known as post-mount, generally goes for $75 to $200, operate from side-mounted lever or a top-mounted knob. Most single-handle faucets have pullout spouts.

The cross-shaped design and large wing levers are the more popular designs. However, most faucets have different handles that can be attached to a faucet body for a customized look.

2. If the style of the faucet is important, begin your choosing with the type of finish. The most affordable finish for a faucet is a chrome finish. Usually priced around $60. The chrome-finish has a long warranty on scratches.

The more colorful enamel coatings generally will cost you from $20 to $200 more, and are more susceptible to scratches and chipping. Add 25 to 40 percent more to the price of coated faucets for stainless steel faucets.

3. A PVD (physical vapor deposition) finish is better than usual plated finishes but add $150 to $750 more in costs. The PVD finish is done by vaporizing the metal and glazing it with a scratch-resistant and non-tarnishing film.

Look at brushed chrome, oil-rubbed bronze and satin nickel for a rustic appeal. The brushed finish and satin finish cleverly hides scratches.

4. There are more to spouts aside from the standard straight faucets. There are high-arching goose-like spouts, great for filling pots. A pull-out faucet can get you anywhere in a sink with three-bowls. You can go from a spray mode to a stream mode with a touch. There are also restaurant-type models for those extra long hoses.

5. Know that there are four kinds of faucets.

a. The compression valve:

The compression valve uses rubber washers. The compression valve type of faucet will eventually leak but they are typically easy to repair.

b. The ball valves:

The ball valve controls the flow and temperature of the water by using a steel ball. The ball valves are washerless and easy to maintain because of this. Replacing a ball valve is readily affordable and easy to do.

c. The ceramic disk

The ceramic disk is virtually a maintenance free water faucet. It is guaranteed not to wear out but is obviously much more expensive than the ball valve or compression valve.

d. The cartridge faucet

Much like the ceramic disk, the cartridge faucet usually does not need any maintenance. Just like the ceramic disk, it has a hefty price tag.

Regardless of the type of faucet you choose. Always check the warranty and the finish.

6. You may opt for filtering faucets, costing $200 plus, to bring in purified water. Several filters are placed under the sink while others are fitted inside the spout. To set the maximum water temperature, an anti-scald faucet can be used. An electronic faucet with an infrared sensor is also available. They save on water and allow for cleaner handles.

In general, you don't need to hand over your hard earned money to pay for good quality. Most faucets have the same basic parts and sometimes even the same finish across several price lines.

To have a streamlined, urban look, choose a faucet that is mounted on the wall, this is often used with vanity bowls.

Be sure that your faucet connection matches your sink holes. If they don't match, you'll have to provide more drill holes or cover the unused holes using an escutcheon plate.

All faucets in general carry at least one year warranties. Even the low-end models carry at least one year of warranty. Many faucets carry a warranty by the manufacturer that is more than one year.

Good luck choosing the perfect faucet for you.

About the Author

For more great faucet information and resources check out:

http://www.elegantfaucets.info

Yellow Pages
As the temperature rises, so does water use, as Americans head outdoors to embrace time-honored summer rituals from washing the car to watering the lawn.

Water Faucet